rawson
Hauled out at Marina Seca, Mexico
Hauled out at Marina Seca, Mexico
water btwn ballast and hull?
We hauled out recently and discovered water between the ballast and hull when we removed the bolts for the rudder strap. It appears this has lead to some delamination on the inner layers of roven that are close to the ballast. We pounded around with the hammer to find these dead spots. We have drilled some test holes and are trying to dry it out. Any advice would be great. We are also currently taking off the gel coat which was not in great shape. We discovered that on both sides of the boat about 2 feet up there is a bonding strip inside the hull. About every 8 inches from |
 |
Little Sanctuary in Mexico - Photo
Sanctuary in San Francisco
Buying a RAWSON 30 Pilothouse, any suggestions
OK,
Apparently I can't proofread either..
My partner and I are SERIOUSLY considering a 30' Rawson Pilothouse and are hoping some of you folks can share some wisdom on this boat..thanks
Wayne
New Rawson going from La Paz to San Carlos-Questions advice for Newbie
It must be the season for people to buy Rawson's in La Paz as I just read Kevin's posts about sailing his new Rawson to Puerto Vallarta. I have also purchased a used Rawson in La Paz that I am repowering.Wistful is a beautiful well outfitted 1981 cutter. Unfortunately I didnt go for a new Yanmar like Kevin but instead elected to get a rebuilt Volvo MD11 to match the blown motor my boat came with. I flew down for two weeks with an installer and delivery crew lined up but unfortnately my "new rebuilt" wasnt running.
Boating and Sailing Magazine Feed